Mazda CX-3: Audio Set [Type A (non-touchscreen)] / Error Indications
If you see an error indication on the display, take appropriate action according to the following methods. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer.
CHECK USB
When the message “CHECK USB” is displayed, it indicates that there is some error in the USB device. Verify that the content recorded in the USB device has MP3/WMA/AAC files and re-connect correctly.
CHECK iPod
If the message “CHECK iPod” is displayed, it indicates that there is a malfunction in the iPod. Verify that the content recorded in the iPod has playable files and connect correctly.
How to use iPod mode
An iPod may not be compatible depending
on the model or OS version. In this case,
an error message is displayed.
NOTE
The iPod functions on the iPod cannot be
operated while it is connected to the unit
because the unit controls the iPod
functions...
Bluetooth®
..
Other information:
Mazda CX-3 (2015-2026) Owner's Manual: Setting the System
The MRCC with Stop & Go function system operates when all of the following conditions are met. Vehicle speed is 0 km/h (0 mph) to 145 km/h (90 mph) The MRCC with Stop & Go function is turned on. The brake pedal is not depressed. The electric parking brake (EPB) is released (electric parking brake (EPB) indicator light is turned off)...
Mazda CX-3 (2015-2026) Owner's Manual: Turn and Lane-Change Signals
The ignition must be switched ON to use the turn and lane-change signals. Turn Signals Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed. If the indicator light continues to flash after a turn, manually return the lever to its original position...
Categories
- Manuals Home
- Mazda CX-3 Owners Manual
- Mazda CX-3 Service Manual
- Speedometer
- Warning Lights
- Identification Numbers
- New on site
- Most important about car
Child-Restraint System Types
In this owner's manual, explanation of child-restraint systems is provided for the following three types of popular child-restraint systems: infant seat, child seat, booster seat.
NOTE
Installation position is determined by the type of child-restraint system. Always read the manufacturer's instructions and this owner's manual carefully. Due to variations in the design of child-restraint systems, vehicle seats and seat belts, all child-restraint systems may not fit all seating positions. Before purchasing a child-restraint system, it should be tested in the specific vehicle seating position (or positions) where it is intended to be used. If a previously purchased child-restraint system does not fit, you may need to purchase a different one that will.