Mazda CX-3: Interior Care / Leather Upholstery Maintenance (Some models)
- Remove dust and sand using a vacuum
cleaner.
- Wipe off the soiled area with a soft
cloth and a suitable, special cleaner or
a soft cloth soaked in a mild detergent
(about 5%) diluted with water.
- . Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well.
- Remove moisture with a dry, soft cloth
and allow the leather to further dry in a
well-ventilated, shaded area. If the
leather gets wet such as from rain,
remove the moisture and dry it as soon
as possible.
NOTE
- Because genuine leather is a natural
material, its surface is not uniform and
it may have natural scars, scratches,
and wrinkles.
- To maintain the quality for as long as
possible, periodical maintenance, about
twice a year, is recommended.
- If the leather upholstery comes into
contact with any of the following, clean
it immediately.
- Leaving it uncleaned could cause
premature wear, mold, or stains.
- Sand or dirt
- Grease or oil, such as hand cream
- Alcohol, such as in cosmetic or hair
dressing items
- If the leather upholstery gets wet,
promptly remove moisture with a dry
cloth. Remaining moisture on the
surface may cause deterioration such as
hardening and shrinkage.
- Exposure to direct sunlight for long
periods may cause deterioration and
shrinkage. When parking the car under
direct sunlight for long periods, shade
the interior using sunshades.
- Do not leave vinyl products on the
leather upholstery for long periods.
They may affect the leather quality and
coloring. If the cabin temperature
becomes hot, the vinyl may deteriorate
and adhere to the genuine leather.
Fabric
Clean the soiled area by lightly
dabbing it with a soft cloth soaked in a mild detergent (approx. 5%) diluted
with water.
Wipe off the remaining detergent using
a cloth soaked in clean water and
wrung out well...
Plastic Part Maintenance
CAUTION
Do not use polishing agents.
Depending on the product ingredients,
they could cause discoloration, stains,
cracks or peeling of the coating...
Other information:
Overhead lights (Front)/Map lights, Overhead lights (Rear)
Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver...
The ignition must be switched ON to use
the wipers.
WARNING
Use only windshield washer fluid or plain
water in the reservoir: Using radiator antifreeze as washer fluid is
dangerous. If sprayed on the windshield, it
will dirty the windshield, affect your
visibility, and could result in an accident...
Categories
Opening the liftgate with Electric liftgate opener
Unlock the doors and liftgate, then press
the electric liftgate opener on the liftgate and raise the liftgate when the
latch
releases.

read more