Mazda CX-3: Audio Set [Type A (non-touchscreen)] / Security Setting
If a passcode is set, the system cannot be
activated unless the passcode is input.
NOTE
Do this function only when parked. It is
too distracting to attempt while driving
and you may make too many errors to be
effective.
Passcode setting
- Press the pick-up button or talk button
with a short press.
- Say: [Beep] “Setup”
- Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
- Say: [Beep] “Passcode”
- Prompt: “Passcode is disabled. Would
you like to enable it?”
- Say: [Beep] “Yes”
- Prompt: “Please say a 4-digit
passcode. Remember this passcode. It
will be required to use this system.”
- Say: [Beep] “XXXX” (Say a desired
4-digit passcode, “PCode”.)
- Prompt:“Passcode XXXX (Passcode,
PCode). Is this correct?”
- Say: [Beep] “Yes”
- Prompt:“Passcode is enabled.”
Using Bluetooth® Hands-Free with a passcode
- Press the pick-up button or talk button
with a short press.
- Prompt: “Hands-Free system is
locked. State the passcode to
continue.”
- Say: [Beep] “XXXX” (Say the set
passcode “PCode”.)
- If the correct passcode is input, voice
guidance “XXXXXX... (Ex. “Mary's
device”) (Device tag) is connected” is
announced.
If the passcode is incorrect, voice
guidance “XXXX (4-digit passcode,
Pcode) incorrect passcode, please try
again” is announced.
Canceling the passcode
NOTE
Do this function only when parked. It is
too distracting to attempt while driving
and you may make too many errors to be
effective.
- Press the pick-up button or talk button
with a short press.
- Say: [Beep] “Setup”
- Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
- Say: [Beep] “Passcode”
- Prompt:“Passcode is enabled. Would
you like to disable it?”
- Say: [Beep] “Yes”
- Prompt:“Passcode is disabled.”
Confirmation Prompts
The confirmation prompt confirms the
command content to the user before
advancing to the operation requested by
the user. When this function is turned on,
the system reads out the voice input
command previously received and
confirms whether the command is correct
before advancing to the command
execution.
When the confirmation prompt function is
turned on:
(Ex. “Calling John's device. Is this
correct?”)
When the confirmation prompt function is
turned off:
(Ex. “Calling John's device.”)
NOTE
If the confirmation prompt function is
turned off when making an emergency
call, the system reads out and confirms the
command before executing it.
- Press the pick-up button or talk button
with a short press.
- Say: [Beep] “Setup”
- Prompt: “Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
- Say: [Beep] “Confirmation prompts”
- Prompt: “Confirmation prompts are
on/off. Would you like to turn
confirmation prompts off/on?”
- Say: [Beep] “Yes”
- Prompt: “Confirmation prompts are
off/on.”
The available languages are English,
Spanish, and Canadian French. If the
language setting is changed, all of the
voice guidance and voice input commands
are done in the selected language...
Applicable Bluetooth® specification (Recommended)
Ver. 2.0
Response profile
A2DP (Advanced Audio Distribution
Profile) Ver. 1.0
AVRCP (Audio/Video Remote Control
Profile) Ver...
Other information:
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if
necessary.
R: Replace
L: Lubricate
C: Clean
T: Tighten
D: Drain
Remarks:
*1 Use of FL-22 is recommended when replacing engine coolant. Using engine
coolant other than FL-22 may
cause serious damage to the engine and cooling system...
Inspect the temporary spare tire at least
monthly to make sure it is properly
inflated and stored.
NOTE
The temporary spare tire condition
gradually deteriorates even if it has not
been used.
The temporary spare tire is easier to
handle because of its construction which is
lighter and smaller than a conventional
tire...
Categories
The system operates only when the driver
is in the vehicle or within operational
range while the key is being carried.
NOTE
When the battery power is low, or in
places where there are high-intensity radio
waves or noise, the operational range may
become narrower or the system may not
operate. For determining battery
replacement, Refer to Keyless Entry
System.
read more