Mazda CX-3: Instrument Cluster and Display / Active Driving Display (Some models)

WARNING

Always adjust the display brightness and position with the vehicle stopped: Adjusting the display brightness and position while driving the vehicle is dangerous as doing so could distract your attention from the road ahead and lead to an accident.

CAUTION

• Do not try to adjust the angle or open/close the active driving display manually. Fingerprints on the display will make it difficult to view and using excessive force when operating it could cause damage.
• Do not place objects in the vicinity of the active driving display. The active driving display may not operate or any interference with its operation could cause damage.
• Do not place beverages near the active driving display. If water or other liquids are splashed on the active driving display, it could cause damage.
• Do not place objects above the active driving display or apply stickers to the dust-proof sheet/optical receiver as they will cause interference.
• A sensor is integrated to control the display's luminosity. If the optical receiver is covered, the display's luminosity will lower making the display difficult to view.
• Do not allow intense light to hit the optical receiver. Otherwise, it could cause damage.

NOTE

• Wearing polarized sunglasses will reduce the visibility of the active driving display due to the characteristics of the display.
• If the battery has been removed and re-installed or the battery voltage is low, the adjusted position may deviate.
• The display may be difficult to view or temporarily affected by weather conditions such as rain, snow, light, and temperature.
• If the audio system is removed, the active driving display cannot be operated.

The active driving display indicates the following information:

• Blind Spot Monitoring (BSM) Operation Conditions and Warnings Refer to Blind Spot Monitoring (BSM).
• Distance Recognition Support System (DRSS) Warnings Refer to Distance Recognition Support System (DRSS).
• Traffic Sign Recognition System (TSR) traffic signs and Warnings Refer to Traffic Sign Recognition System (TSR).
• Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Operation Conditions and Warnings Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function).
• Lane Departure Warning System (LDWS) Operation Conditions and Warnings Refer to Lane Departure Warning System (LDWS).
• Advanced Smart City Brake Support (Advanced SCBS) Warnings Refer to Advanced Smart City Brake Support (Advanced SCBS).
• Smart City Brake Support (SCBS) Warnings Refer to Smart City Brake Support (SCBS).
• Smart Brake Support (SBS) Warnings Refer to Smart Brake Support (SBS).
• Cruise Control Operation Conditions Refer to Cruise Control.
• Navigation Guidance (vehicles with navigation system)
• Speed limit indicator (vehicles with navigation system)
• Vehicle Speed

Each setting/adjustment for the active driving display can be performed on the center display.

1. Select the icon on the home screen and display the Settings screen.
2. Select the AD-Disp tab.
3. Select the desired item and perform the setting/adjustment.
   • Method for adjusting screen brightness (automatically/manually)
   • Screen brightness initial settings (automatic adjustment is selected)
   • Screen brightness adjustment (manual adjustment is selected)
   • Display position of active driving display (display height)
   • Active driving display ON/OFF (indication)
   • Navigation guidance ON/OFF
   • Reset settings (reset)

NOTE

The desired driving position (display position, brightness level, display information) can be called up after programming the position. Refer to Driving Position Memory.